Cisco Systems CL-28826-01 Security Camera User Manual


  Open as PDF
of 2616
 
54-5
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 54 Configuring Routing Policies on Firewall Devices
Configuring OSPF
Adjacency Changes These options specify the syslog messages sent when adjacency
changes occur.
Log Adjacency Changes – When selected, the security appliance
sends a syslog message whenever an OSPF neighbor goes up or
down. This option is selected by default.
Log Adjacency Changes Detail – When selected, the security
appliance sends a syslog message whenever any state change
occurs, not just when a neighbor goes up or down. This option is
not selected by default.
Administrative Route
Distances
Settings for the administrative route distances, according to the route
type.
Inter Area – The administrative distance for all routes from one
area to another. Valid values range from 1 to 255; the default value
is 110.
Intra Area – The administrative distance for all routes within an
area. Valid values range from 1 to 255; the default value is 110.
External – The administrative distance for all routes from other
routing domains that are learned through redistribution. Valid
values range from 1 to 255; the default value is 110.
Timers (in seconds) Settings used to configure LSA pacing and SPF calculation timers.
SPF Delay – The time between receipt of a topology change and
the start of shortest path first (SPF) calculations. Valid values range
from 0 to 65535; the default value is 5 seconds.
SPF Hold – The hold time between consecutive SPF calculations.
Valid values range from 1 to 65534; the default value is 10 seconds.
LSA Group Pacing – The interval at which LSAs are collected into
a group and refreshed, checksummed, or aged. Valid values range
from 10 to 1800; the default value is 240 seconds.
Table 54-2 OSPF Advanced Dialog Box (Continued)
Element Description