Cisco Systems CL-28826-01 Security Camera User Manual


  Open as PDF
of 2616
 
54-6
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 54 Configuring Routing Policies on Firewall Devices
Configuring OSPF
Area Tab
Use the Area tab on the OSPF page to configure OSPF areas and networks.
Navigation Path
You can access the Area tab from the OSPF page. For more information about the OSPF page, see
Configuring OSPF, page 54-2.
Related Topics
Add/Edit Area/Area Networks Dialog Box, page 54-7
Configuring OSPF, page 54-2
General Tab, page 54-3
Range Tab, page 54-8
Neighbors Tab, page 54-10
Redistribution Tab, page 54-11
Virtual Link Tab, page 54-13
Filtering Tab, page 54-15
Summary Address Tab, page 54-17
Interface Tab, page 54-18
Default Information
Originate
Settings used by an ASBR to generate a default external route into an
OSPF routing domain.
Enable Default Information Originate – Check this box to enable
generation of a default route into the OSPF routing domain; the
following options become available:
Always advertise the default route – Check this box to always
advertise the default route.
Metric Value – Enter the OSPF metric for the default route.
Valid values range from 0 to 16777214; the default value is 1.
Metric Type – Choose the external link type associated with
the default route advertised into the OSPF routing domain. The
choices are 1 or 2, indicating a Type 1 or a Type 2 external
route. The default value is 2.
Route Map – (Optional) The name of a route map to apply. The
routing process generates the default route if the route map is
satisfied.
Note This field contains only the Route Map name. The Route Map
is created and contained within a FlexConfig; see Chapter 7,
“Managing FlexConfigs” for more information.
Table 54-2 OSPF Advanced Dialog Box (Continued)
Element Description