Filter
Top Products
54-18
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 54 Configuring Routing Policies on Firewall Devices
Configuring OSPF
Add/Edit Summary Address Dialog Box
Use the Add/Edit Summary Address dialog box to add new entries or to modify existing entries in the
Summary Address table.
Navigation Path
You can access the Add/Edit Summary Address dialog box from the Summary Address Tab, page 54-17.
Related Topics
• Configuring OSPF, page 54-2
Field Reference
Interface Tab
Use the Interface tab to configure interface-specific OSPF authentication routing properties.
Navigation Path
You can access the Interface tab from the OSPF page. For more information about the OSPF page, see
Configuring OSPF, page 54-2.
Related Topics
• Table 54-19 on page 54-20
Tag A 32-bit decimal value attached to each external route. This value is not
used by OSPF itself. It may be used to communicate information
between ASBRs.
Advertise Displays “true” if the summary routes are advertised. Displays “false”
if the summary route is not advertised.
Table 54-16 Summary Address Tab (Continued)
Element Description
Table 54-17 Add/Edit Summary Address Dialog Box
Element Description
OSPF Process Choose the OSPF process associated with the summary address. You
cannot change this information when editing an existing entry.
Network The IP address and network mask of the summary address.
Tag The tag value is a 32-bit decimal value attached to each external route.
This is not used by OSPF itself. It may be used to communicate
information between ASBRs. Valid values range from 0 to
4294967295.
Advertise When selected, summary routes are advertised. Deselect this check box
to suppress routes that fall under the summary address. By default, this
check box is selected.