Filter
Top Products
54-25
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 54 Configuring Routing Policies on Firewall Devices
Configuring OSPFv3
OSPFv3 Advanced Properties Dialog Box
Use the OSPF Advanced dialog box to configure settings such as the Router ID, Adjacency Changes,
Administrative Route Distances, Timers, and Default Information Originate settings for an OSPF
process.
Navigation Path
You can access the OSPF Advanced dialog box from the Process Tab, page 54-24.
Related Topics
• Configuring OSPFv3, page 54-22
• About OSPFv3, page 54-22
Field Reference
Area Use the tabs and tables in this panel to manage area, range and
virtual-link definitions. See Area Tab (OSPFv3), page 54-28 for more
about these definitions.
Redistribution Use this panel to manage redistribution definitions. See Add/Edit
Redistribution Dialog Box (OSPFv3), page 54-32 for more about these
definitions.
Summary Prefix Use this panel to manage summary prefix definitions. See Add/Edit
Summary Prefix Dialog Box (OSPFv3), page 54-34 for more about
these definitions.
Table 54-20 Process Tab (Continued)
Element Description
Table 54-21 OSPF Advanced Dialog Box
Element Description
OSPF Process This read-only field displays the ID of the OSPF process you are
configuring.
Router ID On a single device, choose Automatic or IP Address. (An address field
appears when you choose IP Address.)
If you choose Automatic, the highest-level IP address on the security
appliance is used as the router ID. To use a fixed router ID, choose IP
Address and enter an IPv4 address in the Router ID field.
On a device cluster, choose Automatic or Cluster Pool. (An IPv4 Pool
object ID field appears when you choose Cluster Pool.)
If you choose Cluster Pool, enter or Select the name of the IPv4 Pool
object that is to supply the Router ID address. For more information,
see Add or Edit IPv4 Pool Dialog Box, page 6-83.
Ignore LSA MOSPF Select this option to suppress transmission of syslog messages when the
security appliance receives Type 6 (MOSPF) LSA packets.