Filter
Top Products
54-41
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 54 Configuring Routing Policies on Firewall Devices
Configuring RIP
• Configuring No Proxy ARP, page 54-1
• Configuring Routing Information Protocol – a chapter from the “Cisco IOS IP Configuration Guide,
Release 12.2,” providing additional detailed information about RIP
RIP Page for PIX/ASA 6.3–7.1 and FWSM
Use this RIP page to enable the Routing Information Protocol (RIP) on an interface in any FWSM, or in
a PIX/ASA running a pre-7.2 version operating system.
The RIP table on this page lists all interfaces on which RIP is currently defined. Use the Add RIP
Configuration and Edit RIP Configuration dialog boxes to create and maintain these entries. See RIP
Page for PIX/ASA 6.3–7.1 and FWSM, page 54-41 for more information.
Navigation Path
• (Device view) Select Platform > Routing > RIP from the Device Policy selector.
• (Policy view) Select PIX/ASA/FWSM Platform > Routing > RIP from the Policy Type selector.
Select an existing policy from the Shared Policy selector, or create a new one.
When creating a shared RIP policy, you must choose a Version in the Create a Policy dialog box, as
follows:
–
PIX/ASA 6.3-7.1 and FWSM
–
PIX/ASA 7.2 and Later
When assigning a shared RIP policy, be sure to assign the appropriate RIP policy for the device. For
example, you cannot assign a PIX/ASA 7.2+ RIP policy to an FWSM.
Related Topics
• Configuring Static Routes, page 54-48
• Configuring OSPF, page 54-2
• Configuring No Proxy ARP, page 54-1
• RIP Page for PIX/ASA 7.2 and Later, page 54-42
• Standard rules table topics:
–
Using Rules Tables, page 12-7
–
Table Columns and Column Heading Features, page 1-46
Add/Edit RIP Configuration (PIX/ASA 6.3–7.1 and FWSM) Dialog Boxes
Use the Add RIP Configuration and Edit RIP Configuration dialog boxes to add a RIP configuration to
the security appliance, or to make changes to an existing RIP configuration. By adding a RIP
configuration, you enable RIP on the specified interface. Except for their titles, the two dialog boxes are
identical.
Navigation Path
You can access the Add and Edit RIP Configuration dialog boxes from the RIP Page for PIX/ASA
6.3–7.1 and FWSM, page 54-41.