Filter
Top Products
54-45
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 54 Configuring Routing Policies on Firewall Devices
Configuring RIP
RIP - Redistribution Tab
Use the Redistribution panel to manage redistribution routes. These are the routes that are being
redistributed from other routing processes into the RIP routing process. See Add/Edit Redistribution
Dialog Box, page 54-45 for more information.
Navigation Path
You can access the Redistribution tab from the RIP Page for PIX/ASA 7.2 and Later, page 54-42.
Related Topics
• RIP - Setup Tab, page 54-43
• RIP - Filtering Tab, page 54-46
• RIP - Interface Tab, page 54-47
• Chapter 54, “Configuring Routing Policies on Firewall Devices”
Add/Edit Redistribution Dialog Box
Use the Add Redistribution and Edit Redistribution dialog boxes to add and edit redistribution routes on
the RIP - Redistribution Tab, page 54-45. These are the routes that are being redistributed from other
routing processes into the RIP routing process. Except for their titles, these two dialog boxes are
identical.
Navigation Path
You can access the Add and Edit Redistribution dialog boxes from the Redistribution tab on the RIP Page
for PIX/ASA 7.2 and Later, page 54-42.
Field Reference
Enable Auto-Summary When Send and Receive Version 2 is the chosen RIP Version, this
option is available. When checked, automatic route summarization is
enabled. Disable automatic summarization if you must perform routing
between disconnected subnets. When automatic summarization is
disabled, subnets are advertised.
Note RIP Version 1 always uses automatic summarization—you
cannot disable it.
Table 54-30 Setup Tab (Continued)
Element Description
Table 54-31 Add/Edit Redistribution Dialog Box
Element Description
Protocol to Redistribute Choose the routing protocol to redistribute into the RIP routing process:
• Static – Static routes.
• Connected – Directly connected networks.
• OSPF – Routes discovered by the OSPF routing process.
If you choose OSPF, you must also enter the OSPF Process ID and,
optionally, Match criteria.