Cisco Systems CL-28826-01 Security Camera User Manual


  Open as PDF
of 2616
 
CHAPTER
55-1
User Guide for Cisco Security Manager 4.4
OL-28826-01
55
Configuring Security Policies on Firewall
Devices
You can configure general security settings for the device using the General page and the Timeouts page
under Platform > Security. You can enable anti-spoofing on interfaces, configure IP fragment settings,
and configure a variety of timeout values for the device.
This chapter contains the following topics:
General Page, page 55-1
Configuring Timeouts, page 55-4
General Page
Use the General page to configure security settings that help protect against malformed packets, spoofed
packets, fragmented packets, and denial of service attacks. See Configuring Floodguard, Anti-Spoofing
and Fragment Settings, page 55-2 for more information about the settings on this page.
Navigation Path
(Device view) Select Platform > Security > General from the Device Policy selector.
(Policy view) Select PIX/ASA/FWSM Platform > Security > General from the Policy Type
selector. Select an existing policy from the Shared Policy selector, or create a new one.
Related Topics
Chapter 55, “Configuring Security Policies on Firewall Devices”
Add/Edit General Security Configuration Dialog Box, page 55-3
Configuring Timeouts, page 55-4
Field Reference
Table 55-1 General Page
Element Description
Disable Floodguard (PIX 6.3
and FWSM 2.x only)
Check this box to disable Floodguard on the firewall device. This
option is available only on PIX 6.3 and FWSM 2.x devices. See
Configuring Floodguard, Anti-Spoofing and Fragment Settings,
page 55-2 for more information about the Floodguard feature.