Cisco Systems CL-28826-01 Security Camera User Manual


  Open as PDF
of 2616
 
23-23
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 23 Configuring Network Address Translation
NAT Policies on Security Devices
Policy Dynamic Rules Tab
Use the Policy Dynamic Rules tab of the Translation Rules page to view and configure dynamic
translation rules based on source and destination addresses and services. Rules are evaluated
sequentially in the order listed. The row number indicates the rule’s position in the ordering of the list.
You can use the Up Row and Down Row buttons to change the position of the selected rule.
The Add/Edit Policy Dynamic Rule dialog box is used to add and edit these rules. Refer to Add/Edit
Policy Dynamic Rules Dialog Box, page 23-24 for a description of the fields displayed in the table on
this page.
Note Policy dynamic rules are only supported by PIX, ASA and FWSM devices in router mode, and FWSM
3.2 devices in transparent mode. Other devices in transparent mode support only static translation rules.
Navigation Path
You can access the Policy Dynamic Rules tab from the Translation Rules page. See Translation Rules:
PIX, FWSM, and pre-8.3 ASA, page 23-18 for more information.
Note By default, only standard Policy Dynamic Rule elements are displayed in this table. Additional columns
for elements defined in the Advanced NAT Options dialog box can be displayed by right-clicking any
column heading. (All columns are displayed by default on the General Tab, page 23-30.)
Related Topics
Configuring NAT on PIX, FWSM, and pre-8.3 ASA Devices, page 23-17
Add/Edit Policy Dynamic Rules Dialog Box, page 23-24
Advanced NAT Options Dialog Box, page 23-28
Select Address Pool Dialog Box, page 23-22
General Tab, page 23-30
Standard rules table topics:
Using Rules Tables, page 12-7
Filtering Tables, page 1-45
Table Columns and Column Heading Features, page 1-46
IP Address Ranges The IP addresses assigned to the pool; “interface” in this list indicates
PAT is enabled on the specified Interface.
Description The description provided for the address pool.
Selected Row This field identifies the pool currently selected in the list. When you
click OK to close the dialog box, this pool is assigned to the translation
rule.
Table 23-9 Select Address Pool Dialog Box (Continued)
Element Description