Cisco Systems CTSSX20CODEC Security Camera User Manual


 
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com
54
Cisco TelePresence SX20 Quick Set
ADMINISTRATOR GUIDE
TheSIPsettings
SIPProfile[1..1]URI
The SIP URI or number is used to address the system. This is the URI that is registered and used
by the SIP services to route inbound calls to the system. A Uniform Resource Identifier (URI) is a
compact string of characters used to identify or name a resource.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 255>
Format: Compact string with a maximum of 255 characters.
Example: SIP Profile 1 URI: "sip:firstname.lastname@company.com"
SIPProfile[1..1]DisplayName
When configured the incoming call will report the DisplayName instead of the SIP URI.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 255>
Format: String with a maximum of 255 characters.
Example: SIP Profile 1 DisplayName: ""
SIPProfile[1..1]Authentication[1..1]LoginName
This is the user name part of the credentials used to authenticate towards the SIP proxy.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 128>
Format: String with a maximum of 128 characters.
Example: SIP Profile 1 Authentication 1 LoginName: ""
SIPProfile[1..1]Authentication[1..1]Password
This is the password part of the credentials used to authenticate towards the SIP proxy.
Requiresuserrole: ADMIN
Valuespace: <S: 0, 128>
Format: String with a maximum of 128 characters.
Example: SIP Profile 1 Authentication 1 Password:
SIPProfile[1..1]DefaultTransport
Select the transport protocol to be used over the LAN.
Requiresuserrole: ADMIN
Valuespace: <UDP/TCP/Tls/Auto>
UDP: The system will always use UDP as the default transport method.
TCP: The system will always use TCP as the default transport method.
Tls: The system will always use TLS as the default transport method. For TLS connections a
SIP CA-list can be uploaded to the video system. If no such CA-list is available on the system
then anonymous Diffie Hellman will be used.
Auto: The system will try to connect using transport protocols in the following order: TLS,
TCP, UDP.
Example: SIP Profile 1 DefaultTransport: Auto
SIPProfile[1..1]TlsVerify
For TLS connections a SIP CA-list can be uploaded to the video system.
Requiresuserrole: ADMIN
Valuespace: <On/Off>
On: Set to On to verify TLS connections. Only TLS connections to servers, whose x.509
certificate is validated against the CA-list, will be allowed.
Off: Set to Off to allow TLS connections without verifying them. The TLS connections are
allowed to be set up without verifying the x.509 certificate received from the server against
the local CA-list. This should typically be selected if no SIP CA-list has been uploaded.
Example: SIP Profile 1 TlsVerify: Off
SIPProfile[1..1]Outbound
The client initiated connections mechanism for firewall traversal, connection reuse and
redundancy. The current version supports http://tools.ietf.org/html/draft-ietf-sip-outbound-20.
Requiresuserrole: ADMIN
Valuespace: <On/Off>
On: Set up multiple outbound connections to servers in the Proxy Address list.
Off: Connect to the single proxy configured first in Proxy Address list.
Example: SIP Profile 1 Outbound: Off
Introduction
Table of contents
Web interface
Advanced settings
Appendices
Advanced settings