Filter
Top Products
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved. www.cisco.com
7
Cisco TelePresence SX20 Quick Set
ADMINISTRATOR GUIDE
Startingthewebinterface
The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In the following you will find information how to use the web
interface for system configuration and maintenance.
1.Connecttothevideosystem
Open a web browser and enter the
IP address of the video system in the
address bar.
To find the IP address (IPv4 orIPv6), tap
More > Settings > System Information
on a Touch controller; or navigate to
Home > Settings > System information
when using a remote control and the
on-screen menu.
2.Signin
Enter the user name and password for
your video system and press Sign In.
The system is delivered with a default
user named admin with no password
(i.e. leave the Password field blank when
signing in for the first time).
NOTE: We strongly recommend that you
set a password for the admin user to
restrict access to system configuration,
see the next page.
Signout
Click on your user
name and select
Sign out from the
drop down menu.
Introduction
Table of contents
Web interface
Advanced settings
Appendices
Web interface