Filter
Top Products
8-2
Cisco NAC Guest Server Installation and Configuration Guide
OL-15986-01
Chapter 8 Configuring RADIUS Clients
Adding RADIUS Clients
Note Any time you make a change to a RADIUS component on the Cisco NAC Guest Server, you will need
to Restart the RADIUS service for the changes to become active.
Adding RADIUS Clients
Step 1 From the administration interface select Devices > Radius Clients from the left hand menu.
Figure 8-1 RADIUS Clients
Step 2 In the Radius Clients page (Figure 8-1), click the Add Radius button to add a RADIUS client.
Figure 8-2 Add RADIUS Client
Step 3 In the Add Radius Client page (Figure 8-2), type a descriptive Name for the RADIUS client.
Step 4 Type the IP Address of the RADIUS client. This needs to match the IP address from which the RADIUS
request originates.