Cisco Systems OL-24201-01 Camera Accessories User Manual


 
7-10
User Guide for Cisco Secure Access Control System 5.3
OL-24201-01
Chapter 7 Managing Network Resources
Network Devices and AAA Clients
Exporting Network Resources and Users
To export a list of network resources or users:
Step 1 Click Export on the Users, Network Devices, or MAC Address page of the web interface.
The Network Device page appears.
Step 2 Choose the filter condition and the Match if operator, and enter the filter criterion that you are looking
for in the text box.
Step 3 Click Go.
A list of records that match your filter criterion appears. You can export these to a .csv file.
Step 4 Click Export to export the records to a .csv file.
A system message box appears, prompting you for an encryption password to encrypt the .csv file during
file transfer.
To encrypt the export .csv file, check the Password check box and enter the encryption password. You
can optionally choose to not encrypt the file during transfer.
Step 5 Click Start Export to begin the export process.
The Export Progress window appears, displaying the progress of the export process. If any errors are
encountered during this process, they are displayed in the Export Progress window.
You can terminate the export process at any time during this process. If you terminate the export process,
all the reports till the termination of the process are exported. If you want to resume, you have to start
the export process all over again.
Step 6 After the export process is complete, Click Save File to save the export file to your local disk.
The export file is a .csv file that is compressed as export.zip.
Creating, Duplicating, and Editing Network Devices
You can use the bulk import feature to import a large number of network devices in a single operation;
see Performing Bulk Operations for Network Resources and Users, page 7-8 for more information.
Alternatively, you can use the procedure described in this topic to create network devices.
To create, duplicate, or edit a network device:
Step 1 Choose Network Resources > Network Devices and AAA Clients.
The Network Devices page appears, with a list of your configured network devices, if any.
Step 2 Do one of the following:
Click Create.
Check the check box next to the network device name that you want to duplicate, then click
Duplicate.
Click the network device name that you want to modify, or check the check box next to the name
and click Edit.