Cisco Systems OL-24201-01 Camera Accessories User Manual


 
12-24
User Guide for Cisco Secure Access Control System 5.3
OL-24201-01
Chapter 12 Managing Alarms
Creating, Editing, and Duplicating Alarm Thresholds
Related Topics
Creating, Editing, and Duplicating Alarm Thresholds, page 12-11
Configuring General Threshold Information, page 12-13
Configuring Threshold Notifications, page 12-32
ACS System Health
When ACS evaluates this threshold, it examines whether any system health parameters have exceeded
the specified threshold in the specified time interval up to the previous 60 minutes. These health
parameters include percentage of CPU utilization, percentage of memory consumption, and so on.
If any of the parameters exceed the specified threshold, an alarm is triggered. By default, the threshold
applies to all ACS instances in your deployment. If you want, you can limit the check to just a single
ACS instance.
Choose this category to define threshold criteria based on the system health of ACS. Modify the fields
in the Criteria tab as described in Table 12-18.
Monitoring and Reporting Collector Check the check box to have this process monitored. If this process goes down,
an alarm is generated.
Monitoring and Reporting Alarm Manager Check the check box to have this process monitored. If this process goes down,
an alarm is generated.
Monitoring and Reporting Job Manager Check the check box to have this process monitored. If this process goes down,
an alarm is generated.
Monitoring and Reporting Log Processor Check the check box to have this process monitored. If this process goes down,
an alarm is generated.
Filter
ACS Instance Click Select to choose a valid ACS instance on which to configure your
threshold.
Table 12-17 ACS Process Status
Option Description
Table 12-18 ACS System Health
Option Description
Average over the past Use the drop-down list box to select the amount of time you want to configure
for your configuration, where <min> is minutes and can be:
15
30
45
60
CPU Enter the percentage of CPU usage you want to set for your threshold
configuration. The valid range is from 1 to 100.
Memory Enter the percentage of memory usage (greater than or equal to the specified
value) for your threshold configuration. The valid range is from 1 to 100.