Cisco Systems OL-24201-01 Camera Accessories User Manual


 
13-20
User Guide for Cisco Secure Access Control System 5.3
OL-24201-01
Chapter 13 Managing Reports
Working with Catalog Reports
Shared secret mismatch
Step 5 See the Troubleshooting RADIUS Authentications, page 14-6 to troubleshoot a failed change of
authorization attempt.
A failed dynamic CoA will be listed under failed RADIUS authentications.
Customizing Reports
To customize a system report:
Step 1 Select Monitoring & Reports > Reports > Catalog > report_type > report_name, where report_type
is the type of report, and report_name is the name of the report that you want to customize.
The Reports page appears.
Step 2 Click the radio button next to the name of the report you want to customize, or click the name of the
report you want to customize.
Step 3 Click Run.
The Run Report page appears.
Step 4 Modify fields in the Run Reports page as required.
Step 5 Click Run.
The report appears.
Step 6 Click Launch Interactive Viewer.
Step 7 Modify the report contents as required and click Save As to save the customized report with the same,
or a different, report name in any Catalog > Reports page.
Note If you save the customized report with the same name as the original system report (overwriting
the original system report), you cannot delete it. To restore a customized report to the default,
preconfigured system report settings, see Restoring Reports, page 13-20.
The customized report is saved to your specified location.
Restoring Reports
Use the procedure described in this topic, to restore a system report that you have customized back to its
original preconfigured system report settings.
This procedure resets all reports that reside in a report catalog type. For example, if you want to reset a
specific customized report that resides in the Monitoring & Reports > Reports > Catalog > Endpoint
page, this procedure completes that task but also resets all other reports within the Endpoint page.
Step 1 Select Monitoring & Reports > Reports > Catalog > report_type, where report_type is the type of
report in which the customized report that you want to reset to the original system report settings resides.
Step 2 Click Reset Reports.