Filter
Top Products
2-7
User Guide for Cisco Secure Access Control System 5.3
OL-24201-01
Chapter 2 Migrating from ACS 4.x to ACS 5.3
Common Scenarios in Migration
Common Scenarios in Migration
The following are some of the common scenarios that you encounter while migrating to ACS 5.3:
• Migrating from ACS 4.2 on CSACS 1120 to ACS 5.3, page 2-7
• Migrating from ACS 3.x to ACS 5.3, page 2-8
• Migrating Data from Other AAA Servers to ACS 5.3, page 2-8
Migrating from ACS 4.2 on CSACS 1120 to ACS 5.3
In your deployment, if you have ACS 4.2 on CSACS 1120 and you would like to migrate to ACS 5.3,
you must do the following:
Step 1 Install Cisco Secure Access Control Server 4.2 for Windows on the migration machine.
Step 2 Back up the ACS 4.2 data on CSACS 1120.
Step 3 Restore the data in the migration machine.
Step 4 Run the Analysis and Export phase of the Migration utility on the migration machine.
Step 5 Install ACS 5.3 on CSACS 1120.
Step 6 Import the data from the migration machine to the CSACS 1120 that has ACS 5.3 installed.
See http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/migration/
guide/migration_guide.html for a detailed description of each of these steps.
Downloadable ACLs Shared Profile
Components
Policy Elements > Authorization
and Permissions > Named
Permission Objects >
Downloadable ACLs
See Creating, Duplicating, and
Editing Downloadable ACLs,
page 9-31.
You can add downloadable ACLs
(DACLs) to a network access
authorization profile.
After you create the
authorization profile, you can
add it as a result in an
authorization policy in a network
access service.
RADIUS VSA Interface
Configuration
System Administration >
Configuration > Dictionaries >
Protocols > RADIUS > RADIUS
VSA.
See Creating, Duplicating, and
Editing RADIUS
Vendor-Specific Attributes,
page 18-6.
You configure RADIUS VSA
attributes as part of a network
access authorization profile.
You can add authorization
profiles as results in an
authorization policy in a network
access service.
Table 2-1 Functionality Mapping from ACS 4.x to ACS 5.3 (continued)
To configure... In ACS 4.x, choose... In ACS 5.3, choose... Additional information for 5.3