Cisco Systems OL-24201-01 Camera Accessories User Manual


 
17-11
User Guide for Cisco Secure Access Control System 5.3
OL-24201-01
Chapter 17 Configuring System Operations
Editing Instances
Step 4 Click Submit.
Port Port for Management service.
MAC Address MAC address for the instance.
Description Description of the primary or secondary instance.
Check Secondary Every
(only applies for primary
instance)
Rate at which the primary instance sends a heartbeat status request to the secondary instance. The
default value is 60 seconds. The minimum value is 30 seconds and the maximum value is 30
minutes.
Statistics Polling Period
(only applies for primary
instance)
Rate at which the primary instance polls the secondary instance for statistical and logging
information. During each polling period, the primary server does not send any query to all the
secondary servers, but, all ACS servers send their health information to the log collector server.
The minimum value is 60 seconds and the maximum value is 30 minutes. However, you can
specify a value of 0 which indicates to turn off polling and logging. As a result, the log collector
server does not show any health status. The default value is 60 seconds.
Enable Auto Activation
for Newly Registered
Instances (only applies
for primary instance)
Check this check box to automatically activate the registered secondary instance.
Instance Status
Status Indicates if the primary instance or secondary instance is online or offline.
Version The current version of the ACS software.
Replication Status (only
applies for secondary
instances)
Replication status values are:
UPDATEDReplication is complete on ACS instance. Both management and runtime
services are current with configuration changes from the primary instance.
PENDING—Request for full replication has been initiated.
REPLICATING—Replication from the primary to the secondary is processing.
DEREGISTERED—Deregistered the secondary instance from the primary.
N/ANo replication on primary instance.
Last Update Time (only
applies for primary
instance)
Time stamp of the last database configuration change. The time stamp is in the form hh:mm
dd:mm:yyyy.
Last Replication Time
(only applies for
secondary instances)
Time stamp of the last replication. The time stamp is in the form hh:mm dd:mm:yyyy.
Last Replication ID (only
applies for primary
instance)
Transaction ID that identifies the last configuration change on the secondary instances. This value
increases by 1 for every configuration change. Valid values are 1 to infinity.
Primary Replication ID
(only applies for
secondary instances)
Transaction ID that identifies the last configuration change on the primary instance. This value
increases by 1 for every configuration change. Valid values are 1 to infinity.
Table 17-5 Distributed System Management Properties Page (continued)
Option Description