Cisco Systems OL-24201-01 Camera Accessories User Manual


 
18-5
User Guide for Cisco Secure Access Control System 5.3
OL-24201-01
Chapter 18 Managing System Administration Configurations
Managing Dictionaries
Step 3 Click Submit to configure the RSA SecurID Prompts.
Managing Dictionaries
The following tasks are available when you select System Administration > Configuration >
Dictionaries:
Viewing RADIUS and TACACS+ Attributes, page 18-5
Configuring Identity Dictionaries, page 18-10
Viewing RADIUS and TACACS+ Attributes
The RADIUS and TACACS+ Dictionary pages display the available protocol attributes in these
dictionaries:
RADIUS (IETF)
RADIUS (Cisco)
RADIUS (Microsoft)
RADIUS (Ascend)
RADIUS (Cisco Airespace)
RADIUS (Cisco Aironet)
RADIUS (Cisco BBSM)
RADIUS (Cisco VPN 3000)
RADIUS (Cisco VPN 5000)
RADIUS (Juniper)
RADIUS (Nortel [Bay Networks])
Accept System PIN Prompt Text string to accept the system-generated PIN. The default value is “ARE
YOU PREPARED TO ACCEPT A SYSTEM-GENERATED PIN?”.
For the two PIN entry prompts below, if the prompt contains the following
strings, they will be substituted as follows:
{MIN_LENGTH}- will be replaced by the minimum PIN length
configured for the RSA Realm.
{MAX_LENGTH}- will be replaced by the maximum PIN length
configured for the RSA Realm.
Alphanumeric PIN Prompt Text string for requesting an alphanumeric PIN.
Numeric PIN Prompt Text string for requesting a numeric PIN.
Re-Enter PIN Prompt Text string to request the user to re-enter the PIN. The default value is
“Reenter PIN:”.
Table 18-6 RSA SecurID Prompts Page
Option Description