Filter
Top Products
Chapter 2 Installing the Cisco IPICS Server Software
Installing Cisco IPICS Server Software
2-40
Cisco IPICS Server Installation Guide
OL-8155-01
h. To initiate the copy procedure, drag the upgrade file from the left pane of the
window to the right pane.
A progress window displays while the file copies to the server. When the copy
completes, the upgrade file displays in the right pane.
i. To close the SSH Tectia File Transfer Client, click X.
Step 2 To connect to the Cisco IPICS server, open an SSH Tectia Client window on your
PC by performing the following procedure:
a. To open the SSH Tectia Client, click Start and choose All Programs >
SSH Tectia Client > SSH Tectia Client.
The SSH Tectia Client displays.
b. To open a connection to the Cisco IPICS server, click Quick Connect.
The Connect to Remote Host window displays.
c. In the Host field, enter the DNS name or the IP address for your Cisco IPICS
server. Then, press Tab.
d. In the User Name field, enter root. Then, click Connect.
The Enter Password window displays.
e. Enter the root password and then click OK.
After the login completes, the SSH Tectia Client displays a root prompt for
the Cisco IPICS server.
Step 3 To view the files in the root directory, enter the following command and press
Enter:
[root] #ls -l
Step 4 Locate the installer file, install_ipics_x_x.bin, where the x_x variable represents
the version of Cisco IPICS you are installing.
Step 5 To begin the installation, type the following command and then press Enter:
[root] #./<name of installer file>.bin -i console
where name of upgrade file represents the name of the .bin file you transferred to
the server.
The window displays a message that informs you that the installer is extracting.
See Figure 2-27 for an example of the message. Please wait while the server
extracts the files.