Filter
Top Products
A-8
Cisco ONS 15600 Reference Manual, R7.2
Appendix A Hardware Specifications
A.2.4 OC48/STM16 SR/SH 16 Port 1310 Specifications
A.2.4 OC48/STM16 SR/SH 16 Port 1310 Specifications
Table A-6 shows the OC48/STM16 SR/SH 16 Port 1310 card specifications.
Table A-6 OC48/STM16 SR/SH 16 Port 1310 Card Specifications
Specification Type Description
Line Bit rate: 2.49 Gbps
Code: Scrambled NRZ
Fiber: 1310 nm single-mode
Loopback mode: Facility
Connectors: OGI
Compliance: SONET Telcordia GR-253
Transmitter Max. transmitter output power: –3 dBm
Min. transmitter output power: –10 dBm
Center wavelength: 1266 nm to 1360 nm
Nominal wavelength: 1310 nm
Transmitter: Fabry Perot laser
Note
The CTC Maintenance > Transceiver tab shows the OPT levels. CTC
might show OPT levels at 1 dBm more or less than the actual card
OPT level.
Receiver Max. receiver level: –3 dBm
Min. receiver level: –18 dBm
Receiver: Positive-intrinsic-negative (PIN) diode
Link loss budget: 8 dBm min., with 1 dBm dispersion penalty
Loopback mode Facility (Line)
Note
You must use a 3-dBm fiber attenuator when connecting a fiber
loopback to an OC48/STM16 SR/SH 16 port 1310 card. Never
connect a direct fiber loopback.
Operating temperature 23 to 122 degrees Fahrenheit (–5 to +50 degrees Celsius)
Operating humidity 5 to 95%, noncondensing
Dimensions Height: 16.50 in. (419 mm)
Width: 1.50 in. (38 mm)
Depth: 18.31 in. (465 mm)
Card weight: 5.0 lb (2.27 kg)
Compliance SONET Telcordia GR-253
When installed in a system, ONS 15600 cards comply with these safety
standards: UL 60950, CSA C22.2 No. 950, EN 60950, IEC 60950
Eye safety compliance: Class 1 (21 CFR 1040.10 and 1040.11) and Class 1
(IEC 60825) laser products