Filter
Top Products
A-10
Cisco ONS 15600 Reference Manual, R7.2
Appendix A Hardware Specifications
A.2.6 OC192/STM64 SR/SH 4 Port 1310 Specifications
A.2.6 OC192/STM64 SR/SH 4 Port 1310 Specifications
Table A-8 shows the OC192/STM64 SR/SH 4 Port 1310 card specifications.
Table A-8 OC192/STM64 SR/SH 4 Port 1310 Card Specifications
Specification Type Description
Line Bit rate: 9.96 Gbps
Code: Scrambled NRZ
Fiber: 1310 nm single mode
Transmitter Max. transmitter output power: –1 dBm
Min. transmitter output power: –6 dBm
Center wavelength: 1290 nm to 1330 nm
Nominal wavelength: 1310 nm
Receiver Max. receiver level: –1 dBm
Min. receiver level: –11 dBm
Link loss budget: –5 dB min., with no dispersion or 4 dB optical path loss at
BER = 1
–12
including dispersion
Loopback mode Payload
Note
You must use a 3-dBm fiber attenuator when connecting a fiber
loopback to an OC192/STM64 SR/SH 4 Port 1310 card. Never
connect a direct fiber loopback.
Connectors OGI
Operating temperature 23 to 122 degrees Fahrenheit (–5 to +50 degrees Celsius)
Operating humidity 5 to 95%, noncondensing
Dimensions Height: 16.50 in. (419 mm)
Width: 1.50 in. (38 mm)
Depth: 18.31 in. (465 mm)
Card weight: 12.0 lb (5.44 kg)
Compliance SONET Telcordia GR-253
When installed in a system, ONS 15600 cards comply with these safety
standards: UL 60950, CSA C22.2 No. 950, EN 60950, IEC 60950
Eye safety compliance: Class 1 (21 CFR 1040.10 and 1040.11) and Class 1
(IEC 60825) laser products