Filter
Top Products
A-14
Cisco ONS 15600 Reference Manual, R7.2
Appendix A Hardware Specifications
A.3 SFP/XFP Specifications
Table A-14 describes the power and noise limited performances parameters for the OC-SC-2G series
SFPs.
Table A-15 provides cabling specifications for the single-mode fiber (SMF) SFPs/XFPs. The ports of the
listed SFPs/XFPs have LC-type connectors and the minimum cable distance for all SFPs/XFPs listed is
6.5 feet (2 m). Maximum cable distance for all SFPs/XFPs listed is 328 ft (100 m).
Table A-14 Power and Noise Limited Performances
Parameter Power Limited Performances Noise Limited Performances
Input power
range
–9 to
–28 dBm
At BER = 10
–12
with SONET framed
PRBS23
622 Mbps – 2.0 Gbps at OSNR
1
of 20 dB,
0.1 nm bandwidth
2.0Gbps – 2.7Gbps at OSNR of 21dB,
0.1 nm bandwidth
1. OSNR = optical signal-to-noise ratio
–9 to
–22 dBm
At BER = 10
–12
with SONET framed
PRBS23
At OSNR of 16 dB at 0.1 nm bandwidth.
Dispersion
tolerance
–800 to
3600 dBm
622 Mbps – 2.0 Gbps
Power penalty = 3 dB
OSNR = 20 dB at 0.1 nm bandwidth
(Noise penalty = 0 dB)
–800 to
3600 dBm
622 Mbps – 2.0 Gbps
Noise penalty = 2 dB
OSNR = 18 dB at 0.1 nm bandwidth
(Power penalty = 0 dB)
–800 to
2400 dBm
2.0 Gbps – 2.7 Gbps
Power penalty = 3 dB
OSNR = 21 dB at 0.1 nm bandwidth
(Noise penalty = 0 dB)
–800 to
2400 dBm
2.0 Gbps – 2.7 Gbps
Noise penalty = 3 dB
OSNR = 19 dB at 0.1 nm bandwidth
(Power penalty = 0 dB)
Table A-15 Single-Mode Fiber SFP/XFP Port Cabling Specifications
SFP Product ID Wavelength
1
1. Typical loss on a 1310-nm wavelength SMF is 0.6 dB/km.
Fiber Type Cable Distance
ONS-SI-622-L2
Long Reach
1550 nm 9 micron SMF 80 km (49.71 mi.)
ONS-SE-2G-L2 1550 nm 9 micron SMF 80 km (49.71 mi.)
ONS-SE-Z1 1310 nm 9 micron SMF 15 km (9.3 mi.)
ONS-SI-155-L2 1550 nm 9 micron SMF 80 km (49.71 mi.)
ONS-XC-10G-S1 1310 nm 9 micron SMF 2 km (1.2 miles)
ONS-XC-10G-L2 1550 nm 9 micron SMF 80 km (49.71 miles)