Filter
Top Products
2-17
Cisco ONS 15600 Reference Manual, R7.2
Chapter 2 Card Reference
2.7 OC192/STM64 SR/SH 4 Port 1310 Card
2.7 OC192/STM64 SR/SH 4 Port 1310 Card
Note
For card specifications, see the “A.2.6 OC192/STM64 SR/SH 4 Port 1310 Specifications” section on
page A-10.
The OC192/STM64 SR/SH 4 Port 1310 card provides four short-range, Telcordia GR-253-CORE
compliant, SONET OC-192 ports per card. The ports operate at 9953.28 Mbps over a single-mode fiber.
The OC192/STM64 SR/SH 4 port 1310 card has four physical connector adapters with two fibers per
connector adapter. The card supports STS-1 payloads and concatenated payloads at STS-3c, STS-12c,
STS-24c, STS-48c, or STS-192c signal levels.
2.7.1 OC192/STM64 SR/SH 4 Port 1310 Slots and Connectors
You can install OC192/STM64 SR/SH 4 Port 1310 cards in Slots 1 through 4 and 11 through 14. The
card provides four bidirectional OGI-type connector adapters on the faceplate (angled downward),
carrying two fiber strands (one transmit and one receive). Only one transmit and receive pair is used per
connector adapter. On a breakout cable, use port three, fiber 4 (transmit) and fiber 3 (receive).
412345678
— — Transmit 4 Receive 4 — — — —
Table 2-15 OC192/STM64 LR/LH 4 Port 1550 Card OGI Connector Pinout (continued)
Connector OGI Pin and Card Port