Filter
Top Products
xxxix
Cisco ONS 15454 Reference Manual, R4.1.x and 4.5
February 2004
About this Manual
Related Documentation
To install, turn up, provision, and maintain a Cisco ONS 15454 node and network, refer to the
Cisco ONS 15454 Procedure Guide, Release 4.1 and Release 4.5.
For alarm clearing, general troubleshooting, and hardware replacement procedures, refer to the
Cisco ONS 15454 Troubleshooting Guide, Release 4.1 and Release 4.5.
Document Conventions
This publication uses the following conventions:
Chapter 10, “Circuits and Tunnels” Includes STS and VT, bidirectional or
unidirectional, revertive or non-revertive,
electrical or optical, multiple and path trace circuit
information, as well as DCC tunnels
Chapter 11, “SONET Topologies” Includes the SONET configurations used by the
ONS 15454; includes BLSRs, path protection
configurations, linear ADMs, subtending rings,
and optical bus configurations, as well as
information about upgrading optical speeds within
any configuration
Chapter 12, “DWDM Topologies” Includes the DWDM configurations used by the
ONS 15454; including hubbed rings, multihubbed
rings, single span links, meshed rings, and linear
configurations, as well as information about
DWDM node types, automatic power control,
automatic node setup, and DWDM network
topology discovery.
Chapter 13, “IP Networking” Includes IP addressing scenarios and information
about IP networking with the ONS 15454
Chapter 15, “Performance Monitoring” Includes performance monitoring statistics for all
cards
Chapter 16, “Ethernet Operation” Includes Ethernet applications for the G series and
E series Ethernet cards
Chapter 17, “SNMP” Explains Simple Network Management Protocol
(SNMP) as implemented by the Cisco ONS 15454
Table 1 Cisco ONS 15454 Reference Manual Chapters (continued)
Title Summary
Convention Application
boldface Commands and keywords in body text.
italic Command input that is supplied by the user.
[ ] Keywords or arguments that appear within square brackets are optional.