Clarity D613HS Cordless Telephone User Manual


 
1. Connect the DC adapter cord into the DC 6V 300mA port on
the bottom of the base; plug the adapter into your wall outlet. See
Figure 1.
2. Slide open the battery compartment door and connect the
rechargeable battery into the battery compartment. See Figure 2.
3. Put the handset on the base to charge for at least 24 hours
before first use. Subsequent charging time should be 6-8 hours a day.
INSTALLING YOUR D613HS
USER GUIDE
© 2009 Clarity, a division of Plantronics, Inc. All rights reserved.
Amplifying your life, Clarity, the amplification device, Clarity and
the amplification device combined, Clarity, D613HS, D603, D613,
D613C, Clarity Power are trademarks or registered trademarks of
Plantronics, Inc.
Rev. E (9-09)
CONTENTS & PARTS CHECKLIST
User guide
Handset
DC adapter
6V 300mA
Charger
Your package includes all the items as shown here. If there is
anything missing, please contact our Customer Care Department
immediately.
NOTE: PLEASE RETAIN A COPY OF PROOF OF PURCHASE
FOR YOUR RECORDS.
Battery Performance
The battery icon will blink on the menu screen when the battery is
low. A fully charged battery will provide an estimated 10 hours of
talk time and 100 hours of standby time.
To keep your battery pack in the best condition, leave the handset
off the base for a few hours at a time. Running the battery pack
down at least once will help it last as long as possible. The charge
capacity of rechargeable battery pack will reduce with time as it
wears out, giving the handset less talk/standby time. Eventually it will
need to be replaced.
Note: Battery pack and handset may become warm during charging.
This is normal.
Battery
pack
Electric Wall Outlet
(insert power adapter)
Figure 1
Figure 2
ADDITIONAL HANDSETS
To register your additional handset
The original handset is pre-registered for use. Up to 5 handsets
can be registered to one base station. Additional handsets must
be registered to the base before you can use them.
1. Place the unregistered handset on the charger.
2. Press and hold the FIND button for 4 seconds on the base.
3. Release the FIND button once the IN USE light starts to flash.
4. A confirmation tone will sound when registration is successful.
Handset X is displayed where X denotes the number of handsets.
The phone will then go back to idle.
De-register All Handsets
1. Unplug the power from the base.
2. Press and hold the FIND button on the base for 10 seconds.
3. Plug back in the power of the base.
4. Release once the IN USE light starts to flash rapidly.
5. Within 2 seconds, press and release the FIND button on the
base again. This will de-register all handsets. The IN USE light on
the base will be OFF and NOT REGISTERED will display on each
handset menu screen.
INTRODUCTION
The D613HS is an expandable handset that is
compatible with the Clarity D613, D603 and D613C.
The D613, D603 and D613C will support up to 5
handsets.
Additional information can be found in the D613/D603/
D613C User Guides.
SPECIFICATIONS
Amplified dB Level: 30dB
Dimensions
Handset Size: 7” x 2 ” x 1 1/4” (H x W x D)
Base Size: 2 1/2” x 3 1/2” x 4” (H x W x D)
Weight
Handset Weight: 3.14 ounces
Charger Weight: 4 ounces
Power Requirements
DC Adapter: 6V, 300 mA
Battery: 2.4V 550mAh Ni-MH
TROUBLESHOOTING
Registration
Unable to register another handset
1. If there is a total of 5 handsets registered, the maximum has
been reached.
2. The display shows NOT REGISTERED. You must de-register a
handset in order to register a new one.
Privacy of communications may not be ensured when using this phone.
Warning: To maintain the compliance with the FCC’s RF exposure
guideline, place the base unit at least 20 cm from nearby persons.
For body worn operation, this handset has been tested and meets the
FCC RF exposure guidelines when used with the Clarity accessories
supplied or designated for this product. Use of other accessores may
not ensure compliance with FCC RF exposure guidelines.
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury to
persons including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the telephone.
3. Do not use this telephone near a bathtub, wash basin, kitchen sink or
laundry tub, in a wet basement, near a swimming pool or any where else
there is water.
4. Avoid using a telephone (other than a cordless type) during a storm.
There may be a remote risk of electrical shock from lightning.
5. Do not use the telephone to report a gas leak in the vicinity of the
leak.
6. Unplug this telephone from the wall outlets before cleaning. Do not
use liquid cleaners or aerosol cleaners on the telephone. Use a damp
cloth for cleaning.
7. Place this telephone on a stable surface. Serious damage and/or injury
may result if the telephone falls.
8. Do not cover the slots and openings on this telephone. This telephone
should never be placed near or over a radiator or heat register. This
telephone should not be placed in a built-in installation unless proper
ventilation is provided.
9. Operate this telephone using the electrical voltage as stated on the
base unit or the owner’s manual. If you are not sure of the voltage in
your home, consult your dealer or local power company.
10. Do not place anything on the power cord. Install the telephone
where no one will step or trip on the cord.
11. Do not overload wall outlets or extension cords as this can increase
the risk of fire or electrical shock.
12. Never push any objects through the slots in the telephone. They can
touch dangerous voltage points or short out parts that could result in
a risk of fire or electrical shock. Never spill liquid of any kind on the
telephone.
13. To reduce the risk of electrical shock, do not take this phone apart.
Opening or removing covers may expose you to dangerous voltages
or other risks. Incorrect reassembly can cause electric shock when the
appliance is subsequently used.
14. Unplug this product from the wall outlet and refer servicing to
the manufacturer under the following conditions: when the power
supply cord or plug is frayed or damaged; if liquid has been spilled into
the product; if the telephone has been exposed to rain or water; if
the telephone has been dropped or the case has been damaged; if the
telephone exhibits a distinct change in performance; if the telephone
does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating
instructions. Improper adjustment may require extensive work by a
qualified technician to restore the telephone to normal operation;
15. Never install telephone wiring during a lightning storm.
16. Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
17. Never touch uninsulated telephone wires or terminals unless the tele
phone line has been disconnected at the network interface.
18. Use caution when installing or modifying telephone lines.
IMPORTANT SAFETY
INSTRUCTIONS
BATTERY SAFETY INFORMATION
Dispose of used batteries according to the instructions.
1. Do not dispose of the battery in a fire as it may explode. Check
with local codes for possible special disposal instructions.
2. Do not open or mutilate the battery. Released electrolyte is
corrosive and may cause damage to the eyes and skin. It may be
toxic if swallowed.
3. Exercise care in handling batteries in order not to short the
battery with conducting materials such as rings, bracelets and keys.
The battery or conduction material may overheat and cause burns.
User guide
D613HS™
Amplified Cordless DECT
Expandable Handset
(Compatible only with
Clarity D603, D613 and D613C)
Clarity, a Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
1-800-426-3738
www.clarityproducts.com
TM
D613HS