ClearOne comm 910-171-101-PAL Camcorder User Manual


 
FlexCam iCam — Introduction
3
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
FlexCam iCam — Introduction
2
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Unpacking
Carefully remove the FlexCam iCam unit, cables and power supply from the packaging.
Ensure that you received the following parts:
ClearOne is not responsible for product damage incurred during shipment.You must make
claims directly with the carrier.Inspect your shipment carefully for obvious signs of
damage. If the shipment appears damaged, retain the original boxes and packing material for
inspection by the carrier.Contact your carrier immediately.
Important safeguards
Before operating the FlexCam iCam, please read the entire manual thoroughly.The FlexCam
iCam was designed, built and tested for use indoors.The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the camera or
peripheral equipment and/or create a potentially unsafe operating condition.
Do not operate the FlexCam iCam if the power cord is damaged or if the camera has been
dropped or damaged.A qualified service technician must examine the FlexCam iCam
before operating.
Position the cord so that it will not be tripped over, pulled on or come into contact with hot
surfaces.
Always unplug the FlexCam iCam from the electrical outlet before cleaning or servicing.
To reduce the risk of electric shock,do not immerse in water or other liquid.
Use only the power supply provided with the FlexCam iCam. Use of any unauthorized power
supply will void any and all warranties.
Handling the camera
All ClearOne cameras are for indoor use only.
Do not use cameras next to food or beverages. Cameras have been tested and approved for
use in chemistry labs. However,be very careful not to spill liquid or dry chemicals or
solvents on the camera.
Do not use cameras right next to working TVs, radios, motors, transformers or magnetic
fields.
Avoid touching the lens.To clear any dust, blow pressurized air onto the lens. For
accidental smears or smudges, wipe carefully with a lens cleaning cloth.
Clean exterior of camera by wiping with a clean, damp cloth; do not use any abrasive
chemicals.
Use both hands whenever adjusting the neck of the camera;this will avoid any unnecessary
strain on the camera’s base and will keep the camera from tipping over unexpectedly.
Do not attempt to take the camera apart. There are no user-serviceable components inside.
Do not direct the lens of the camera toward the sun. This may damage the camera.
Operating and storage conditions
Do not store or operate the camera under the following conditions:
Outdoors or connected to outdoor or auxiliary power sources.
In environments with high humidity.
In inclement weather.
Under severe vibration.
S-video to composite adapter
12 VDC Power Supply
Plug
Microscope Couplers
26 mm, 28 mm and
34 mm
12' S-video cable
FlexCam iCam
FlexCam iCam
Manual
Figure 1.FlexCam iCam and accessories
!