Filter
Top Products
In case of unsatisfactory operation, the end user shall promptly notify the Manufacturer at the
address set forth below in writing, giving full particulars as to the defects or unsatisfactory
operation.Upon receipt of such notice,the Manufacturer will give instructions respecting the
shipment of the product, or such other matters as it elects to honor this warranty as above provided.
This warranty does not cover damage to the product during shipping and the Manufacturer assumes
no responsibility for such damage.All shipping costs shall be paid by the customer.
This warranty extends only to the original end user and is not assignable or transferable.This
warranty is governed by the laws of the State of Utah,without regard to the conflicts of interests
provisions thereof.
ClearOne Communications Inc.
1825 Research Way
Salt Lake City, Utah 84119
FCC Part 15/ICES-003 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules and Industry Canada ICES-003.These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment.This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual,may cause harmful
interference to radio communications.Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct the interference at
his/her own expense.
Operation is subject to the following two conditions:(1) This device may not cause interference,and
(2) This device must accept any interference including interference that may cause undesired
operation of the device.
Changes or modifications not expressly approved by ClearOne Communications could void the user's
authority to operate the equipment.
European Compliance
This equipment has been approved in accordance with Council Directive 1999/5/EC "Radio
Equipment and Telecommunications Equipment". Compliance of the equipment with the Directive is
attested by the application of the CE mark on the equipment.
EC Declaration of Conformity
Application of Council Directive(s): 1999/5/EC Radio equipment and
Telecommunications Terminal Equipment
(R&TTE) Directive
Manufacturer's Name: ClearOne Communications
Manufacturer's Address: 1825 West Research Way Salt Lake City,
Utah 84119 U.S.A.
Model No.: FlexCam iCam 910-171-101-PAL
FlexCam iCam Digital 910-171-102-PAL
FlexCam iCam — Appendix
13
FlexCam iCam — Appendix
12
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Standard(s) to which Conformity is declared:
89/336/EEC "Electromagnetic Compatibility (EMC) Directive":
EN 55022: 1994 (Emissions) Specification for limits and methods of measurement of
radio interference characteristics of information
technology equipment
EN 61000-3-2:1995/A1/A2:1998 Part 3: Limits - Section 2: Limits for harmonic
current emissions.
EN 61000-3-3:1995 Section 3:Limitation of voltage fluctuations and
flicker in low voltage supply systems for equipment
with rated current up to and including 16 A
EN 55024: 1998 (Immunity) Information technology equipment -Immunity
characteristics - Limits and methods of
measurement
EN 61000-4-2: 1995/A1:1998 Electrostatic Discharge
EN 61000-4-3: 1996/A1:1998 Radiated RF Immunity
EN 61000-4-4: 1995 Electrical Fast Transients
EN 61000-4-5: 1995 Lighting Surge
EN 61000-4-6: 1996 Conducted RF Immunity
EN 61000-4-11: 1994 Voltage Dips and Voltage Interruptions
73/23/EEC "Low Voltage Directive (LVD)":
IEC 60950-1: 2003 Safety of Information Technology Equipment,
Including Electrical Business Equipment
We, the undersigned, hereby declare that the equipment specified above conforms to the above
Directives and Standards.
Manufacturer
Signature
Roger J.Midgley
Full Name
Project Manager
Position
Legal Represent
ative in Europe
Signature
Martin Offwood
Full Name
Managing Director EMEA North
Position