Filter
Top Products
13
COWON J3
Firmware is the software that is embedded within the
hardware.
Upgrading it can enhance system stability and provide
additional features.
Please be advised that Beta (unofficial) firmware versions
may cause system malfunction.
How to upgrade the firmware
1. Download the latest firmware from the SUPPORT section
of the website (http://www.COWON.com).
2. Use the USB cable to connect COWON J3 to the PC.
3. Unzip the downloaded firmware and copy it to the root
folder of COWON J3.
4. Perform “Safely remove the hardware” function on your
PC and disconnect the USB cable.
* COWON J3 firmware can only be updated if the power
adaptor is connected.
5. When you turn on the product, the firmware upgrade
process will start.
6. Successful firmware upgrade can be confirmed by
turning on the product, the version of firmware will be
shown at start up.
+ Firmware Upgrade
Before you start!
7. The current firmware version can be checked in
Settings - System - Information.
- Fully charge the player before upgrading the firmware.
- Do not turn the player off before the firmware update has
been completed. It may damage the product, and will void
any warranty.
- Back up any important data before the firmware upgrade
as any data stored on the device may be deleted during the
process. COWON accepts no liability for any loss of data.