Filter
Top Products
Examine the sensor for any contaminants. You may want to rotate
the SensorScope left and right to fully examine all areas of the sensor
chamber.
If your sensor appears clean, stop here. Do not clean your sensor
if it doesn’t need it. Over cleaning your sensor increases the risk of
permanent damage to your sensor and your camera.
Note: If you did not purchase the SensorScope System or DigitalDuster System, you will
still be able to clean your sensor safely and effectively. Although it is recommended to use
the SensorScope and SensorVac during the cleaning process to prevent cleaning your sensor
when it doesn’t need to be cleaned.
Step 3: Clean with SensorVac
•Attach brush tip.
•Plug the SensorVac into a USB port on your computer or into the
included battery pack.
•Turn on SensorVac light and suction.
•Start by cleaning around the sensor and inside of the camera.
chamber, removing as much debris as possible using non-contact
suction.
•Gently brush the sensor with the vacuum’s soft brush tip to loosen
any debris that may be stuck to the sensor.
Dirty
Clean
9