Filter
Top Products
•Press the shutter button. The mirror will lock up and the shutter will
remain open until the power is turned off.
•Remove the camera lens.
•Turning the power off will reset the mirror and shutter.
Canon 1Ds
•Make sure the battery is fully charged.
•Turn the power on.
•Press and hold the Menu button and turn the dial to the tool2 menu.
•Release the Menu button to select the tool2 menu.
•Press and hold the Select button and turn the dial to Sensor Cleaning.
•Release the Select button to select Sensor Cleaning.
•Press and hold the Select button and turn the dial to OK.
•Release the Select button to select OK.
•Press the shutter button. The mirror will lock up and the shutter will
remain open until the power is turned off.
•Remove the camera lens.
•Turning the power off will reset the mirror and shutter.
Canon 1D Mark II
•Make sure the battery is fully charged.
•Turn the power on.
•Press and hold the Menu button and turn the dial to the tool2 menu.
•Release the Menu button to select the tool2 menu.
•Press and hold the Select button and turn the dial to Sensor Cleaning.
•Release the Select button to select Sensor Cleaning.
•Press and hold the Select button and turn the dial to OK.
•Release the Select button to select OK.
•Press the shutter button. The mirror will lock up and the shutter will
remain open until the power is turned off.
•Remove the camera lens.
•Turning the power off will reset the mirror and shutter.
17