Delkin Devices SensorScope System Camera Accessories User Manual


 
Getting Started
Congratulations on purchasing the SensorScope System. You are
on your way to ensure that you produce the clearest photographs
possible.
Read this guide carefully before you start cleaning your digital SLR
image sensor. This guide will help you clean your sensor safely and
effectively.
DO NOT ATTEMPT TO CLEAN YOUR SENSOR WITHOUT READING
THIS ENTIRE MANUAL.
You need to clean your sensor.
Dirty sensors are a real problem.
What you can’t see can affect your pictures. Dirt comes from many
sources and it inevitably ends up on your sensor. If the dirt is not
removed in a safe and effective way, your images will show this
debris. Four common types of contaminants can get on your image
sensor: metallic, fi ber, organic and silica/quartz particles. Only the
SensorScope System and Digital Duster System addresses all four
types of material and the proper way to remove them safely.
Cleaning is safe and easy.
Anyone can clean an image sensor in just a few minutes. Clean all
digital SLR cameras in four easy steps:
Step One: Set up your camera to be cleaned.
Step Two: Use the SensorScope to inspect your sensor. If it isn’t dirty,
don’t clean it!
Step Three: Clean your sensor with the SensorVac and wet/dry
SensorWands.
Step Four: Inspect your sensor with the SensorScope again. That’s it!
1