Q-See QR4274-418 Security Camera User Manual


 
Q-SEE QUICK INSTALLATION GUIDE
M
M
O
O
D
D
E
E
L
L
N
N
U
U
M
M
B
B
E
E
R
R
Q
Q
R
R
4
4
2
2
7
7
4
4
-
-
4
4
1
1
8
8
6 | Page
The Motion detection Menu has three sections, including Channel Status, Sensitivity and Motion area.
STATUS: This option allows you enable motion detection
on any channel.
SENSITIVITY: This option allows you to set sensitivity
level of motion detection from 1 to 4, with 4 being the
highest.
Next, click on the MD AREA SETUP button, which will
display the picture on the left. This option allows you to
select the area you want to be sensitive to motion. The
area in red is sensitive to motion. You can set this area by
using the mouse or REV, FWD, and SEL keys on the front
panel. Once you have set the area, right click with the
mouse or push the ESC key to save the setting. After you
have set all of the cameras, click on the Apply button to
save the settings.
PART 7 - SETTING UP THE DVR TO PLAYBACK
Search Playback:
From the Main Menu select SEARCH to display the Video
Search Menu shown to the right. If you input a specific date
and click Search, you will find all the recordings for that
day. When you select an item, you will playback the
recordings in 4 channel mode; or, click [File list] button to
display File list interface, where you can playback or
backup the file you selected. See File List heading below.
In the playback window you can play video Forward at 2x,
4x, and 8x speeds, Slow play at 1/2x, 1/4x, and 1/8x, or
normal play, pause and play frame by frame using the
playback control bar, and adjust volume by clicking or
sliding tune control bar. When playback has finished,
system will return to previous menu.