Filter
Top Products
6
Using the charger
2 Carefully press the two latches at the bottom of the desktop stand into the
base of the charger.
To operate the charger in the vertical position:
1 Insert the tab at the pointed end of the desktop stand into the mounting
hole (marked with a ) on the back of the charger.
2 Carefully press the two latches at the bottom of the desktop stand into the
base of the charger.
Using the charger
Connecting your charger to a power source
To use with an standard AC power outlet:
1 Connect the AC adapter to the power input jack on the back of your charger.
Dynex DX-DA100501 camcorder battery charger - combined.fm Page 6 Friday, October 28, 2005 2:54 PM