Elinchrom 73320 Camera Accessories User Manual


 
5
Security Advise
The maximum modelling lamp wattage for all Rotalux softboxes is
limited to 300 W
Ensure that the Rotalux is correctly assembled and locked to the
ash unit.
The unit, the ash tube and accessories may become very hot
during and after use! To avoid injuries, handle with isolating cloth or
wait until parts have cooled down.
Even though we use re retardant materials; the fabric should
never get in contact with the hot ash tube or the modelling lamp.
The metal Speed Ring and the locking knob for the revolving
system may heat up enormously when the ash unit is used at
maximum ash and modelling lamp power levels. Please wait until
the parts have cooled down, before packing away.
Always switch the ash unit off before tting or exchanging
reectors and softboxes.
Ensure that the ventilation system of ashunits is working correctly.
Double check that the internal fabric diffuser is correctly tted and
does not make contact with the hot ash tube and modelling lamp.
Lower the modelling lamp power and reduce the number of ashes
per minute, when small size softboxes are used, such as the
Rotalux models 26178-26180-26181-26175. The reective surface
is very close to the modelling lamp/ ashtube. The fabric, can be
damaged by excessive heat.
Optional Rotagrids for direct lighting are available for the Rotalux
70x70 cm, 60x80 cm and the 90x110 cm.
Lighttools™ offers a wide range of grids in different sizes and
angles for Rotalux softboxes.
Adapter Speed Rings for other ash brands such as Profoto™,
Bowens™, Hensel™, Alien-Bees™ / Balcar™ are available soon.
Adapters for additional brands are in process.
English