Elinchrom BX 250RI Camera Accessories User Manual


 
SET Cong Mode: (to congure included features)
-SwitchmoduleOFF.
-HoldtestpushbuttonandswitchTXON.
-KeeptestpushbuttonpresseduntilSTATUSLEDisON.
CheckalsoEL-SkyportPC/MACsoftware3.0forchangingTransmitterSpeedsetting.
TheEL-Skyport TransmittertriggerstheEL-SkyportReceivermodulesinthefollowingmodes:
1. OffUnitisOFF,nofunction.
2. Select Group - Group (1 to 4).
SetswitchtoGroup.andselectGroup1to4.
AllcorrespondingEL-SkyportReceiverswiththesameselected Group (1 to 4)aretriggered.
3. ALLModeswitchissettoALL.
AllcorrespondingEL-SkyportReceiversaretriggeredregardlessofwhichGroupisselected.
Integrated Hot-Shoe SYNC 2.5 mm Socket
UsetheincludedSynccabletoconnecttheintegrated2.5mmMonoJacksocketwiththecameraor
lensPCsocketdirectly.
EL-Skyport Transmitter SPEED RX Features
CompatiblewithRangerRX,StyleRX,DigitalRX,BXRi250/500,RangerQuadraAS!
IftheEL-SkyportTransmitterSPEEDisusedwiththeEL-Skyport Transceiver RX, BXRi 250 / 500
or the Ranger Quadra AS,
thefollowingEXTRA
featuresareavailable:
DependinguponwhichGroupisselected,thefollowingRX-unitsettingscanbemodied:
1.Flash power increase in 1/10 f-stops.
presspushbutton+toincreasethepowerofselectedGroupof(orALL)RX-unitsin1/10f-
stops.
2. Flash power decrease in 1/10 f-stops.
presspushbutton-toreducethepowerofselectedGroupof(orALL)RX-unitsin1/10f-stops.
3. Modelling lamp toggle.
pressandholdthepushbutton+,2secondsorlongerbeforereleasing,
totoggle modelling lampoftheselectedGroupof(orALL)RX-units.
Power save mode timer:
-AfternotusingtheTransmitterfor30minutesthePowerSavemodeisactive.Toreactivatethe
Transmitter,presstheTESTpushbutton.
-ThePowerSavemodetimercanbeconguredwiththeEL-SkyportPC/MACsoftwarev3.0and
higher.
Status LED:
-LEDashesevery4secondsonetimein“Standard”modeandtwotimesin“Speed”mode.
-LEDintensitycorrespondtothebatterystatus-ifofforverylow=>exchangethebattery.
-LEDisOFFiftheTransmitterisswitchedOFForinPowerSavemode.
.
Reset to manufacturer default setting:
-SwitchON.
-Presstestbuttonformin10seconds.
19
English