Filter
Top Products
Start Here
1 Make sure you have everything:
Note: If you’ll be connecting your scanner using IEEE 1394 (FireWire,
®
iLink™), you need to purchase an IEEE 1394 cable (not included).
2 Remove all the packing tape, but leave the large sticker in place
until instructed to remove it.
3 Insert the hinges on the cover
into the square holes at the
back of the scanner. (Make
sure the cable does not get
caught under the scanner
cover.) Close the cover.
Unpack Your Scanner
Turn over
1
Scanner Software for Mac OS X
1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
2 Double-click the EPSON CD-ROM icon and then double-click the
English folder.
3 Double-click the EPSON Scan Installer icon.
4 Enter your Administrator name and password and click OK.
5 When you see the EPSON Scan Installer window, click Install,
then follow the on-screen instructions.
6 Double-click the Reference Guide icon.
7 Click Install to install your Scanner Reference Guide.
When installation is complete, continue with the instructions under
“Install SilverFast.”
Scanner
CD-ROM with EPSON
®
Scan driver, software,
and electronic manuals
USB cable
Film holders
LaserSoft
®
SilverFast
®
SE
CD-ROM
Adobe
®
Photoshop
®
Elements
2.0 CD-ROM
IMPORTANT!
Leave the sticker in
place until you are
instructed to remove it.
Wait! You must install your software before connecting the scanner
to your computer. The install process may take up to 15 minutes.
Be sure to close all open programs and turn off any virus
protection programs.
If you don’t already have Adobe Photoshop or Photoshop Elements on your
computer, install Photoshop Elements from the CD-ROM included with your
scanner. To view the Photoshop user manuals, you’ll need Adobe Acrobat
®
Reader
®
(included on your Photoshop Elements CD).
Windows
®
First you’ll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
1
Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive. The installer starts automatically.
2 Make sure US English is selected and click Next.
3 Follow the on-screen instructions to begin installation and accept the
software license conditions.
Install the Software
2
continue
4 When you see this screen, click the Adobe Photoshop Elements
button.
5 Follow the on-screen instructions. When you’re asked for a software
serial number, enter the number printed on the sticker attached to the
CD-ROM sleeve.
6 If you don’t have Acrobat Reader, eject the CD-ROM and repeat
steps 1 – 3. Then select Adobe Acrobat Reader to install it.
Continue with the instructions below to install the scanner software.
Scanner Software
1 Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
The installer starts automatically.
If it doesn’t start, double-click My Computer (in Windows XP, click
Start > My Computer), double-click EPSON, then double-click
EPSON.
2 When you see a message asking you to select a language,
click English.
3 At the Software Installation screen, click Install.
4 Read the license agreement, then click Agree.
5 Follow the on-screen instructions to install each program. After each
one is installed, click Next or Finish to continue. Note that EPSON
Smart Panel™ installs in several steps. If you have PDA (Palm™ or
Pocket PC) software on your computer, Presto! PixExpress will be
installed.
6 Click Exit. The EPSON Product Registration screen appears.
7 Register your scanner as instructed. At the last screen, click Done or
close your browser.
Continue with the instructions under “Install SilverFast.”
Click Install
Click Adobe
Photoshop
Elements
5 When you’re asked for a software serial number, enter the number
printed on the sticker attached to the CD-ROM sleeve.
6 When you see this screen, click the Install button.
7 Follow the on-screen instructions to install the software.
8 When you’re finished, click Quit.
9 If you don’t have Acrobat Reader, you can install it from the CD-ROM.
Open the Adobe Acrobat Reader folder. Then double-click the Reader
Installer icon to install it.
Continue with the following instructions to install the scanner software.
Scanner Software for Mac OS 8.6 – 9.x
1
Insert the scanner software CD-ROM in the CD-ROM or DVD drive.
(If necessary, double-click the EPSON CD-ROM icon to open it.)
2 Double-click .
3 When you see a message asking you to select a language,
click English.
4 When the Software Installation screen appears, click Install.
5 Read the license agreement, then click Agree.
6 When you see the EPSON Scan Installer, click Install.
When the EPSON Scan installation is complete, click Restart.
Don’t remove your CD-ROM. After your Macintosh restarts,
you can install the rest of your software.
7 When your Macintosh restarts, double-click the EPSON CD-ROM
icon to open it, if necessary, then double-click . Click English.
You see this screen:
8 Click Install and follow the on-screen instructions to install each
program. After each one is installed, click Quit to continue. Note
that EPSON Smart Panel installs in several steps. If you have PDA
(Palm) software on your computer, Presto! PixExpress will be installed.
9 Click Exit. The EPSON Product Registration screen appears.
10 Register your scanner as instructed. At the last screen, click Done or
close your browser.
Continue with the instructions under “Install SilverFast.”
Click Install
Click Install
continue
Scanner cover/
transparency unit
Macintosh
®
First you’ll install Adobe Photoshop Elements, then your scanner software.
Photoshop Elements
1 Insert the Adobe Photoshop Elements CD-ROM in the CD-ROM or
DVD drive.
2 Double-click the or CD-ROM icon and double-click the
English folder.
3 Double-click the Install Photoshop Elements icon.
4 Follow the on-screen instructions to begin installation, and accept the
software license conditions. In Mac
®
OS X, enter your Administrator
name and password, then click OK.
continue
Click Install
EPSON Perfection
®
3200 Photo
Install SilverFast
(Windows and Macintosh)
1 Insert the LaserSoft SilverFast SE CD-ROM in the CD-ROM or
DVD drive. The installer starts automatically.
In Mac OS X (or on systems where the installer doesn’t start
automatically), double-click the Autostart icon in the CD-ROM folder.
2 Select your language and click Continue.
3 Click the Install SilverFast SE icon.
4 Select the type of plug-in you want to install:
•
Photoshop Plugin Installer (for Adobe Photoshop or Photoshop
Elements)
•
TWAIN Plugin Installer (for other TWAIN-compliant applications)
Then click Install SilverFast.
5 Click Continue or Next, read the license agreement and click Agree,
then follow the steps on the screen to finish the installation.
Restart your system, then follow the instructions on the back of this sheet
to connect the scanner.
Click this icon
4042843-00 Printed in Singapore
Click Install