Filter
Top Products
5-12
4 Click Retry. If you see the Connection Failed
message again, click
Setup.
You see the following dialog box:
5 Select another port if necessary. In most cases, it is best
to leave the
Port setting at Auto because Image Expert
can detect the camera connection automatically.
If you have a serial device connected to one port and an
internal modem on the other, you can try setting the
Port to COM3 or COM4.
6 Select a slower connection speed. Image Expert
automatically chooses the fastest speed that works with
your system, but this may actually be too fast for the
configuration of your port. Try setting the speed to
57600. You may need to experiment to choose the best
speed.
7 When you are finished, click OK.
NOTE
See your
User’s Guide
for more troubleshooting information.
For detailed instructions on using advanced camera features
and working with your software, see your
User’s Guide
.
GetStart.book Page 12 Tuesday, March 2, 1999 5:13 PM