Filter
Top Products
Getting Photos Into Your Computer
4-6
PhotoPC 650 U/G
Rev. C
A5 size INTOP.fm
6/21/00 Pass 0
R
Proof Sign-off:
KOW E.Yamanouchi K.Pipa_______
M.Fujimori _______
K.Pipa _______
Selecting pictures to transfer
There are three ways to select pictures to transfer.
❏
Clicking an individual picture
❏
Holding down the
Shift
or
Ctrl
key (Windows), or
the
J
key (Macintosh), and clicking multiple
pictures
❏
Clicking the
Select All
button to select all the
pictures
Your selected pictures are outlined in red.
Note:
To permanently erase a picture from your camera, select it
and click
Erase
, then confirm the erasure.
Once you have selected pictures, you are ready to
transfer them to your camera. See the next section.
Transferring pictures from the camera to your
computer
You can use the
Save to Folder
button or the
Transfer
button to transfer your pictures from your camera to
your computer.
❏
The fastest method is using the
Save to Folder
on the
Camera Content
tab. This lets you
transfer your pictures and save them directly to a
selected folder on your hard disk, saving battery
power and time. See the next section for
instructions.
❏
You can also use the
Transfer
button on the
Camera Content
tab to import your pictures
into HotShots. This stores the pictures in your
computer’s RAM (memory), not on your hard
disk. See page 4-8 for instructions.
Note:
If your camera shuts off automatically while you are
transferring pictures (to save battery power), click the
Open Camera
button on the TWAIN or Plug-In dialog
box to turn it back on.