Filter
Top Products
First Steps
4
Inserting the Batteries
The camera takes two AA alkaline (LR6) batteries (supplied) or two AA rechargeable Ni-MH batteries
(sold separately). Insert the batteries in the camera as described below.
1
Open the battery-chamber cover.
1 Note
Be sure the camera is off
before opening the battery-
chamber cover.
3 Cautions
• Do not open the battery-chamber cover when
the camera is on. Failure to observe this pre-
caution could result in damage to image fi les or
memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
2
Insert the batteries.
Insert the batteries in the
orientation shown by the
“+“ and “–“ marks inside
the battery chamber.
3 Cautions
• Insert the batteries in the correct orientation.
• Never use batteries with peel-
ing or damaged casing or mix
old and new batteries, batter-
ies with di erent charge levels,
or batteries of di erent types.
Failure to observe these precautions could re-
sult in the batteries leaking or overheating.
• Never use manganese, Ni-Cd, or lithium batteries. Re-
place AA alkaline batteries with batteries of the
same make and grade as those supplied with
the camera.
3
Close the battery-chamber cover.
Battery casing
Battery casing
Battery casing
Battery casing