Filter
Top Products
97
Viewing Images
6
96
6.2.2 Specifying images for printing without using DPOF
(
single-frame printing
)
1Press the “w” button for about 1 second to turn
the camera on in Playback mode.
2Select “®” PICTBRIDGE in “ò” USB MODE
in the “˜” SET-UP menu (➡P.81).
3Press the “POWER” button to turn the camera
off.
●
!
Do not connect to a PC when the “ò” USB MODE setting is
set to “
®” PICTBRIDGE. See P.113 if you connect to a PC
by mistake.
1
Terminal
adapter
4
1Plug the terminal adapter into the terminal
adapter connection socket on the camera.
2Turn the printer on.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Use an xD-Picture Card that was formatted on the camera.
2
1Plug the USB cable (mini-B) into the USB socket
of the terminal adapter.
2Connect the terminal adapter to your printer
using the USB cable (mini-B).
5
Press the “w” button for about 1 second to turn the
camera on in Playback mode.
“CHECKING USB” appears and then the menu is
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the “ò” USB
MODE setting is
“®” PICTBRIDGE.
●
!
Depending on the printer, some functions are disabled.
CHECC H E C KIK I NGN G USU S B
PI
P I CTBC T B R I DGED G E
3
01 02
1Plug the AC power adapter connector into “DC
IN 5V” socket of the terminal adapter.
2Plug the AC power adapter into the power outlet.
SETS E T
SETS E T
ENGLISHE N G L I S H
SETS E T
NTSCN T S C
PICTBRIDGEP I C T B R I D G E
1
4
3
2
01
02
03
6
1Press “a” or “b” to select “u PRINT DPOF”.
2Press the “MENU/OK” button.
●
!
When [u NOT SET DPOF] appears, the DPOF settings are
not specified.
●
!
To use DPOF printing, the DPOF settings must be specified
on FinePix F10 beforehand (➡P.60).
●
!
Even when “WITH DATE” is specified in the DPOF settings,
the date is not inserted on printers that do not support date
printing.
PP I CTC T B RIR I DGEG E
PRP R I NTN T W I THT H DATED A T E
PRP R I NTN T W I T H OUTO U T DATED A T E
PRP R I NTN T DPOFD P O F
OKO K
01 02
6.2 CONNECTING THE CAMERA DIRECTLY TO THE PRINTER
— PictBridge FUNCTION
5
Press the “w” button for about 1 second to turn the
camera on in Playback mode.
“CHECKING USB” appears and then the menu is
displayed on the LCD monitor.
●
!
If the menu does not appear, check whether the “ò” USB
MODE setting is
“®” PICTBRIDGE.
●
!
Depending on the printer, some functions are disabled.
CHECC H E C KIK I NGN G USU S B
PI
P I CTBC T B R I DGED G E
7
Press the “MENU/OK” button to download the data
to the printer and print the frames specified in the
DPOF settings.
SHEETSS H E E T S
P R I N T INGI N G
CANCELC A N C E L
111191 91 919
●
!
Press the “DISP/BACK” button to cancel the printing.
Depending on the printer, the printing may not be canceled
immediately or printing may stop midway through. When
printing stops midway, briefly turn the camera off and then on
again.
Continued