Filter
Top Products
73
5
72
■ SET–UP Menu Options (Date/time setting, etc.)
Settings Display Explanation
POSTVIEW ON/OFF
This option specifies whether or not an image checking screen
(photography results) is displayed after you take a shot.
The photography results are displayed for about 2 seconds and
then automatically recorded.
In continuous shooting, the photography results are displayed
for a set time before being automatically recorded even if this
option is set to “OFF”.
ON
USB MODE DSC/PC CAM See P.88 for details.DSC
POWER SAVE 2MIN/5MIN/OFF
Use this option to specify whether the camera’s power
consumption is reduced and the camera is subsequently switched
off automatically when it is not being used. See P.74 for details.
2MIN
DATE/TIME SET Use this option to correct the date or time. See P.16 for details.—
Factory
default
q
LCD
ON/OFF
Use this option to specify whether the LCD monitor is automatically
switched ON or OFF when the Mode switch is set to “
q
”.
ON
BEEP F
LOW/HIGH/OFF
This option allows you to set the volume of the beep emitted
when the camera controls are used.
LOW
RESET ALL OK
This resets all camera settings (including the photography and
playback menu settings) other than the date and time to the
factory default values set at shipment. When you press “c”, a
confirmation screen appears. To proceed, press the
“MENU/OK” button again.
—
LANGUAGE
ENGLISH/FRANCAIS/
DEUTSCH
Select English, French or German as the language used for
screen display.
ENGLISH
1Press “a” or “b” to select a menu option and
then press “d” or “c” to change the setting.
2Press the “MENU/OK” button.
The options in the SET–UP screen can be
specified in the “
q” Photography, “w” Playback
and “T” Movie modes.
1Press the “MENU/OK” button to display the
menu screen.
2Press “d” or “c” to select “g” OPTION and
then press “a” or “b” to select “SET–UP”.
3Press the “MENU/OK” button.
●
!
Press “c” for “DATE/TIME” or “RESET ALL”.
21
01
0201
0203
●
!
Screen for still photography
g USING SET– UP