FujiFilm S3000 Digital Camera User Manual


 
73
4
34
01
02
5
1 Press “d” or “c” to display the frame (file) for which you
want to specify DPOF settings.
2
Press “a” or “b” to set a value up to 99 as the number of
copies of the frame (file) to be printed. For frames (files) that
you do not want printed, set the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps 1 and 2.
!
You can order prints of up to 999 image frames on the same
xD-Picture Card.
!
DPOF settings cannot be specified for movies.
Always press the MENU/OK button when
you complete the settings.
Pressing the “BACK” button, no DPOF settings
are specified.
Cancelling a frame
To cancel the DPOF setting for a frame you have specified (cancel
frame), perform steps to and then 1 press “d” or “c” to
select the frame with the DPOF setting you want to cancel and
then 2 set the number of prints to 0 (zero). To cancel the DPOF
setting for another frame, repeat steps 1and 2. When you have
completed the settings, you must press the “MENU/OK” button.
31
Pressing the “BACK” button during the settings, all the
new settings are cancelled. If there were previous
DPOF settings, only the modifications are cancelled.
72
1Press “a” or “b” to select “WITH DATE” or
“WITHOUT DATE”. By selecting the “WITH
DATE”, the date is imprinted on your prints.
2Press the “MENU/OK” button.
!
By selecting the “WITH DATE” setting, you can have
the date imprinted on your shots when you use the
Print Service or a DPOF-compatible printer.
(Depending on the printer specifications, the date
may not be printed in some cases.)
When the data includes a frame with DPOF setting
that were specified on another camera,
¥” appears.
Pressing the “MENU/OK” button erases all of the
DPOF settings already specified for each frame.
You must then specify the DPOF setting for each
frame again.
!
Press the “BACK” button to leave the previous
settings unchanged.
i
DPOF SET FRAME
(
FRAME SET/RESET
)
w
PLAYBACK MENU
33
01
02
When DPOF settings were
specified on another camera
Total number
of prints
Setting for
that frame