Filter
Top Products
17
1
SWITCHING ON AND OFF/SETTING THE DATE AND TIME
●
!
If a confirmation message does not appear, refer to
“CORRECTING THE DATE AND TIME” (➡P.18) to
check and correct the date and time.
●
!
When also leaving the camera for a long period with the
batteries removed, this confirmation message will appear.
●
!
To set the date and time later, press the “BACK” button.
●
!
If you do not set the date and time, this confirmation
message will appear each time you switch the camera on.
1 2
Set the Power switch to turn the camera on and
off.
q : Photography mode
w : Playback mode
OFF: Power-OFF
When you switch the camera on, the indicator
lamp lights (green).
When you first switch the camera on, the date is
cleared. Press the “MENU/OK” button to set the
date and time.
16
LOADING THE BATTERY AND xD-Picture Card™
01
02
03
1Open the slot cover.
2Firmly push the xD-Picture Card fully into the
xD-Picture Card slot.
3Close the slot cover.
●
!
Opening the slot cover while the camera is still
switched on, the camera is switched off.
●
!
The xD-Picture Card will not slide fully into the slot if
it is inserted facing the wrong way. Be careful not to
apply excessive force to the xD-Picture Card.
◆
Replacing the xD-Picture Card
◆
When you push the xD-Picture
Card into the slot and then
slowly remove your finger, the
lock is released and the xD-
Picture Card is pushed out.
You can then pull the xD-
Picture Card the rest of the
way out.
●
!
Take care not to remove your finger too quickly
after the lock is released, as the card may spring
completely out of the slot.