Filter
Top Products
13
PROGRAMMING THE TELEPHONE
STANDBY SCREEN
The handset displays the handset number and user name.
PROGRAMMING FUNCTIONS
The system uses a menu structure to give you access to all of the built-in features.
You may program the following items in main menu: Room Monitor,
Handset Setup.
ROOM MONITOR
1. Make sure your phone is OFF (not in talk mode).
2. Press the MUTE/PROG button to go to the main menu.
3. Press CID/VOL (/\ or V) button to scroll to ROOM MONITOR.
4. Press MUTE/PROG button to enter ROOM MONITOR menu,
ROOM
MONITOR EXTENSION?
shows in the display.
5. Use the touch tone pad to enter the handset number to be monitored,
either 1 or 2.
6. The receiving handset will turn on the microphone and the originating handset
will turn on the earpiece to monitor sound from the receiving handset.
NOTE: For room monitoring mode to work, the originating handset must
NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will emit an alert tone
approximately every 5 seconds if there is an incoming call. You may press the
TALK/END/CALLBACK button to quit room monitor and answer the call.
USER NAME
HANDSET X
> ROOM MONITOR
HANDSET SETUP