Filter
Top Products
20
2. Press the MUTE/PROG button to enter the menu.
DEFAULT SETTING
1YES 2NO
shows in the display.
3. Use the touch-tone pad to select 1 YES or 2 NO, or use the CID/VOL (/\ or
V) button to move the cursor to 1 YES or 2 NO. 2 NO is default setting.
NOTE: If you choose “YES” all the settings in the programmable menu are
returned to factory default setting.
4. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone.
TELEPHONE OPERATION
CHARGE INDICATOR
When the IN USE/CHARGE indicator is lit, the handset is correctly seated in
the cradle and is charging.
MAKING CALLS
1. Pick up the handset, and press the TALK/END/CALLBACK button.
Listen for a dial tone.
2. Dial the number you want to call, or dial the number first then press the
TALK/END/CALLBACK button.
3. When finished, press the TALK/END/CALLBACK button to hang up.
ANSWERING CALLS
1. When the phone rings, pick up the handset, and press the TALK/END/
CALLBACK button.
2. When finished, press TALK/END/CALLBACK to hang up.
NOTE: Adjust the handset volume by pressing the CID/VOL (/\ or V) button
during a call.
CALL TIMER
After you press the TALK/END/CALLBACK button on the handset, the built-
in call timer shows on the display and counts the length of time of the call in
minutes and seconds.