GE 21018 Camcorder User Manual


 
37
NEW CALL XX XX represents the number of new CID records
not reviewed.
Low Battery Indicates the battery needs to be charged.
LONG DISTANCE Indicates CID record is from a long distance call.
HANDSET SOUND SIGNALS
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One short beep (every 7 seconds) Low battery warning
TROUBLESHOOTING GUIDE
TELEPHONE SOLUTIONS
No dial tone
Check or repeat installation steps:
Make sure the base power cord is connected to a working
electrical outlet.
Make sure the telephone line cord is connected to the base and the
wall jack.
Connect another phone to the same jack. If it doesn’t work, the problem
might be your wiring or local service.
The handset may be out of range of the base. Move closer to the base
Make sure the battery is properly charged (for 16 hours).
Make sure the battery pack (in the handset) is properly installed.
The handset should beep when you press the TALK/END/CALLBACK
button, and the charge indicator on the base should be lit when the
handset rests in the cradle. If not, the battery may need to be charged.
Place handset in charge cradle for at least 20 seconds to reset the unit.