GE CG709 Camcorder User Manual


 
Titler
35
Correcting Errors During Programming
Recording Titles on a Tape in the Camcorder
Chart of Characters in Titler’s Register
A B C D E F G H I J K
L M N O P Q R S T U V
W X Y Z
0 1 2 3 4 5 6 7 8 9
: - , . ' ; / ? < > !
1. Attach a power supply, turn on the
camcorder and place the CAMERA/
VCR switch in CAMERA.
2. Locate the place on the tape where you
want to record the title.
Note: If you record a title on a pre-
recorded tape, audio and video will be
erased where the title is inserted. There
may be a 3-4 second pause before existing
audio and video return.
3. Press TITLE to display the title
graphics in the viewfinder. Press
TITLE SELECT to display the other
title in the viewfinder.
4. Press the thumb trigger to start
recording.
5. When you are finished recording the
title, press TITLE to remove the title
graphics from the viewfinder.
Recording Titles While Copying Tapes from Camcorder to another VCR
1. Attach a power supply, turn on the
camcorder and place the CAMERA/
VCR switch in VCR.
2. Place the tape you want to copy in the
camcorder.
3. Press TITLE to display the title page
you want to record in the viewfinder.
Press TITLE SELECT to display the
other title in the viewfinder. The
camcorder will remember the last title.
4. Press TITLE to remove the title page
from the viewfinder.
5. Place a tape with the safety tab in
place in the VCR, and place the VCR
in record pause.
6. Start copying the tape.
7. When you see the place on the tape
you want to record the title, press
TITLE. The title will be recorded on
the copy in place of the original audio
and video.
8. Press TITLE again to stop recording
the title.
1. Press EDIT ADV. until the flashing
cursor is placed over the character you
wish to correct.
2. Press TITLE SELECT + or
until the
correct character appears.
Note: To delete a character, press TITLE
SELECT + or until the blank space
appears.