GE E148OW Camcorder User Manual


 
36 37
36 37
Blink Detection
The Blink Detection feature is on by default, and after taking
each photo, a warning message will pop up if a blink has been
detected in the photo.
1. In any Still Shooting modes, press the
button to enter
the photo menu.
2. Switch between dierent Photo Setup menus and Camera
Setup menus using the Left/Right button, and select the
“Blink Detection” setting using the Up/Down button.
3. Use the Right navigation buttons to enter the submenu,
and select "On" option.
4. Press the
button to conrm the setting and exit the
menu.
5. Press the Shutter button fully to capture the image. A
warning message will be shown on the LCD immediately
after detecting someone has blinked in the picture.
A face must be detected by the camera in order for
smile detection to function correctly.
For optimal detection results, the subject should be
framed to occupy most of the screen space.