Filter
Top Products
Motion Detection
Enable motion detection: Check this option to turn on motion detection.
Click on this
button to add a new window. At most, three windows can exist simultaneously. Use the mouse to
click, hold, and drag the window frame to resize it, or the title bar to move it. Clicking on the ‘x’ at the upper right-hand
corner of the window will delete the window. Remember to save in order to validate the changes.
Click on this
button to save the related window settings. A graphic bar will rise or fall depending on the image’s
motion variations. A green bar means the image variation is under the monitoring level threshold and a red bar means the
image variation is over the monitoring level threshold. When the bar goes red, the motion detection window will also be
outlined in red. Going back to the homepage, the monitoring window is hidden, but the red frame will show when motion
is detected.
Window Name: The text will show at the top of the window.
Sensitivity: This sets the allowable difference between two sequential images.
Percentage: This sets the space ratio of moving objects in the monitoring window.
A higher sensitivity and smaller percentage will allow easier motion detection. The following figure shows the screen
when
is clicked.
32