HP (Hewlett-Packard) 130 Photo Printer User Manual


 
hp photosmart
130
3
load an index card in the paper tray
2
connect the power adapter
reverse page to continue
1
unpack your printer
Printer
Software and Printer
Help on CD
Setup Guide
HP #57
Print cartridge
Sample index
cards
Sample photo
paper
Power adapter
Photo Printing Guide
Software Setup & Product
Support booklet
Make sure you place the printer at least 10 inches away
from a wall or any obstuction to allow space for the paper
to move during printing.
1. Insert the round end of the power adapter into the
power adapter connection on the back of your printer.
2. Plug the power adapter into a working electrical outlet.
Important: Make sure the power adapter cord does not
block the rear paper path.
Rear paper path
1
2
Note: The index card will be used to print a calibration
page in step 5.
1. Open the paper tray door.
2. Place an index card from the sample pack on the
paper tray and slide the ard underneath the output
guide.
3. Move the paper width guide to fit close to the left
edge of the index card without bending it.
Output guide
Paper width guide
C8442-90162
setup
guide