Filter
Top Products
0HGLD-D PV
7URXEOHVKRRWLQJ3ULQWHU3UREOHPV
2 Lift the right side of the ADF module as far as possible, and
then slowly removed the jammed paper.
3 Push the ADF module securely back into place.
&OHDU LQJ 6WDFNOHU0 HGLD-DP V
This section explains how to remove jammed media from the stackler.
When using the stackler, always do the following:
Open and close the top cover of the Stackler after clearing the
media jam.
»Note:
This doesn’t apply with jams in the reversing mechanism.
Check the printer after clearing a stackler media jam.
▲
Caution: Do not use excessive force when pulling jammed media
from the Stackler, as this may tear the media leaving pieces inside the
transport mechanism. Torn edges left inside the Stackler may cause
further media jams.